Not only does the 3.1JF, 3HP Floating Pond Fountain provides the power needed to adequately aerate larger ponds, it provides eye-catching decorative displays. 

Each Fountain is supplied with 5 different interchangeable nozzles, providing you with six different patterns for displays of up to 24' in height or 45' in diameter.  Easily change the nozzles whenever you want to fit specific pond dimensions, weather conditions, or the desired aesthetic effect.

(Spruce pattern shown to left, other 5 patterns pictured below.)
SeePremium Nozzle Options Available with this model

The 3.1JF is supplied with a GFCB protected control panel, model C-85.  The panel includes a 240Volt control panel with timer, 120V GFI protected outlet for lights, and photocell for light operation.  (Lights sold seperately.)  It is recommended that a licensed electrician installs the C-85 control panel and the 3.1JF if you plan to hard-wire the unit into the C-85 control panel.

Add a LR-375 light kit to the 3.1Jf to extend it's beauty into the nighttime hours.  The lighting will enliven the display of the fountain.

• 3HP, 240 Volts.
• Will operate in as little as 24" of water
• Backed by 3 year warranty; Made in the USA
• Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
• Includes motor, float with mooring ropes, underwater rated 200' power cord, C-85, 240volt GFCB protected electrical control panel, and 5 interchangeable spray nozzles with patterns ranging from 24' high to 45' Diameter.