The reliable Fountain Pro Pump WT 345 is a perfect for your large water fountain, pond, aquarium, or industrial tank. It is suitable for indoor or outdoor use and features reliability and water flow adjustment.

• GPH - 245, Max Head - 8.1 feet
• Volts - 120, Watts - 30
• Amps - .4, Size - 3-3/4" x 2-5/8" x 3-3/8"
• Cord Length - 12 feet, Outlet - 3/4" FNPT, 1" Barb, or 1/2" barb adapter
• SJTW wire, 3 pin plug
• Indoor and Outdoor Use
• Water Flow Adjustment

jimmy reyna -
very nice product will buy another soon. need to sell a screen that goes around pump to trap debre. thanks

Stephen A. Jove -
After purchasing a fountain pump that was touted by you to conform to the specifications given prior to the sale, and finding out upon installation several weeks later that this pump was inadequate (too small) to handle the job, you offered me a heavier-duty pump for just the difference in price + shipping. The results were acceptable. This was the first time in literally years that I now have the correct pump for the job - a 6-foot rise from the bottom of the fountain cistern to a sealed bowl, where a 6-inch diameter marble sphere rests on a water-bearing surface when the pump is engaged. The ball now rotates freely upon a thin film of pressurized water - exactly as the intended performance of the fountain dictated. I designed my own control system with a 110VAC relay, two 1-ampere water level switches having no more than an inch of sensitivity (ON VS OFF), and an electric valve taken from an old dishwasher. The system engaged the pump when the high water switch indicates cistern-FULL, while disengaging water flow into the cistern to accommodate the natural evaporation process. Additionally, it protects the pump from overheating when the low water switch indicates cistern-empty.